Which power station runs a ResMed AirSense 10, and for how long?

Buy the BLUETTI AC180: about 6.4 nights with the humidifier off, about 3.6 with it on. That is a ResMed AirSense 10 on its AC outlet, 8 hours a night, counting the power the station uses just to stay on.

Amazon links here are affiliate links: we may earn a commission, at no cost to you. It does not change our numbers. How that works.

$449 at Amazon

Price checked October 17, 2026; Amazon shows today’s price. This is the listing for this model on its own, not a bundle.

BLUETTI AC180 front view1,152 Wh, 974 usable
6.4nights, humidifier off
3.6nights, humidifier on
7.9nights on 12 V, humidifier off, 10 cm H2O

Why it: the cheapest station on Amazon that runs a full night with the heated humidifier on (ranked by cost per night). For the most nights in the 1 kWh class, the Anker SOLIX C1000 uses the least power to stay on: about 9.1 nights with the humidifier off.

Nights on each power station

One full charge, 8-hour nights, ResMed’s figures for an AirSense 10: 7 W with the humidifier off and 22 W with it on (ResMed).

Nights on one charge, AirSense 10 with the humidifier off: label math against our mathBar chart. EcoFlow RIVER 3 Plus: label math 5.1 nights, counting idle 3.0 nights; Anker SOLIX C1000: label math 18 nights, counting idle 9.1 nights; Jackery Explorer 1000 v2: label math 19 nights, counting idle 5.0 nights; BLUETTI AC180: label math 20 nights, counting idle 6.4 nights; EcoFlow DELTA 3: label math 18 nights, counting idle 6.1 nights; Jackery Explorer 2000 v2: label math 36 nights, counting idle 9.6 nights; Anker SOLIX C2000 Gen 2: label math 36 nights, counting idle 7.5 nights.Label mathOur math, counting idleEcoFlow RIVER 3 Plus5.13.0Anker SOLIX C1000189.1Jackery Explorer 1000 v2195.0BLUETTI AC180206.4EcoFlow DELTA 3186.1Jackery Explorer 2000 v2369.6Anker SOLIX C2000 Gen 2367.50 nights40 nights
Grey: battery ÷ 7 W, the simple shortcut. Colour: our math, counting the inverter loss and each station’s own power use. AC outlet, 8-hour nights.
StationHumidifier offHumidifier on12 V port, humidifier off, 10 cm (11.2 W)Label math, humidifier offAmazon
EcoFlow RIVER 3 Plus
286 Wh, estimated
3.01.21.95.1$299 at Amazon
Anker SOLIX C1000
1,056 Wh, tested
9.14.27.318$599 at Amazon
Jackery Explorer 1000 v2
1,070 Wh, tested
5.03.07.319$499 at Amazon
BLUETTI AC180
1,152 Wh, tested
6.43.67.920$449 at Amazon
EcoFlow DELTA 3
1,024 Wh, estimated
6.13.37.018$629 at Amazon
Jackery Explorer 2000 v2
2,042 Wh, tested
9.65.71336$899 at Amazon
Anker SOLIX C2000 Gen 2
2,048 Wh, estimated
7.55.01436$900 at Amazon

Small to big. “Tested”: testers measured that station’s power use and battery. “Estimated”: we use the tested stations’ typical figures. Prices checked October 17, 2026.

Nights at your pressure

ResMed measured how much power an AirSense 10 takes from a 12 V battery at each pressure, with and without the humidifier (ResMed battery guide). We turned each figure into nights on the BLUETTI AC180’s 12 V car port, through ResMed’s DC converter. Find your pressure in your machine’s settings or your sleep report.

PressureHumidifier off (SlimLine tube)Humidifier at 4 (SlimLine tube)Humidifier at 8 (SlimLine tube)Humidifier on Auto, ClimateLineAir heated tubeHumidifier at 8, heated tube at 30 °C
6 cm H2O9.4 nights
8.4 W
5.1 nights
20.8 W
2.9 nights
41.3 W
3.2 nights
37.4 W
2.2 nights
56.5 W
8 cm H2O8.8 nights
9.5 W
4.6 nights
24 W
2.9 nights
41.9 W
2.8 nights
42.6 W
2.2 nights
57.2 W
10 cm H2O7.9 nights
11.2 W
4.1 nights
27.6 W
2.7 nights
43.9 W
2.7 nights
45.2 W
2.1 nights
59 W
12 cm H2O7.3 nights
12.7 W
3.7 nights
31.3 W
2.6 nights
46.3 W
2.5 nights
48.2 W
2.0 nights
61.4 W
16 cm H2O6.6 nights
14.8 W
3.0 nights
40 W
2.4 nights
50.2 W
2.4 nights
50.5 W
1.9 nights
64.4 W
20 cm H2O5.3 nights
19.9 W
2.4 nights
50.3 W
2.2 nights
55.1 W
2.4 nights
52.2 W
1.9 nights
67.3 W

Watts = ResMed’s amps × 12 V, measured at the battery, so the converter’s loss is inside them. Nights count the station’s own 12 V standby draw (6.5 W, estimated: no tester measured it on this unit). ResMed gives no room temperature; a cold room makes the humidifier work harder.

How many watts does a ResMed AirSense 10 use?

7 Whumidifier off
22 Whumidifier on
34 Whumidifier and heated tube

Those are ResMed’s own figures at its test settings: AutoSet 8–15 cm H2O, humidity 6, tube at 28 °C (ResMed, Power consumption of Air10 devices (1018673/1)). From a 12 V battery through ResMed’s converter it takes 8.4–19.9 W with the humidifier off and up to 67.3 W with the humidifier at 8 and the heated tube at 30 °C, depending on pressure (table above).

The 12 V route: ResMed’s DC converter

ResMed recommends a DC converter over an inverter for running its machines from a battery. For the AirSense 10 that is the ResMed Air10 DC/DC converter 90W, part number 37297. It cost $95 at CPAP.com on October 17, 2026. The humidifier works on it, but ResMed warns it “will drain the battery more quickly” (ResMed converter guide).

Not on Amazon as the ResMed part. Amazon’s results were third-party copies when we looked, so we link none. Buy it from a CPAP supplier.

Why the simple math says more nights

The simple math divides the battery by the machine’s watts: 1,152 Wh ÷ (7 W × 8 h) = 20 nights on the BLUETTI AC180. Two things cut that:

So the battery feeds 7 ÷ 0.9 + 14 = 21.8 W and lasts 6.4 nights. The 12 V port has no inverter: about 10 nights at the same watts.

How to set it up for the night

  1. Charge it to 100%. On a Jackery, turn Battery Saving Mode off. Owners say it stops at 85% (owner report).
  2. Turn off the power-saving timer. A Jackery ships with Energy Saving Mode on: at 25 W or less on AC it turns the outlets off after 12 hours. Hold the AC and main power buttons until its icon goes away (Jackery manual). Other brands have a similar setting.
  3. Use the 12 V car port if you can, with ResMed’s Air10 DC converter (part 37297). It skips the inverter. Test it first.
  4. Test one full night at home before you need it. Note the percent left in the morning.

Ask your equipment supplier or doctor before you rely on a power station overnight.

Questions people ask

What size power station do I need for a ResMed AirSense 10?

For one 8-hour night with the humidifier on (22 W), almost any station of 500 Wh or more. The BLUETTI AC180 runs it about 3.6 nights with the humidifier on and 6.4 with it off, counting the power the station uses to stay on.

How many watts does a ResMed AirSense 10 use?

ResMed says 7 W with the humidifier off, 22 W with it on, and 34 W with the heated tube too. From a 12 V battery through its DC converter, 11.2 W at 10 cm H2O with no humidifier.

Can I run an AirSense 10 on a power station's 12 V port?

Yes, with ResMed's DC converter (part 37297, about $95). It skips the inverter, so it lasts longer: about 7.9 nights on the BLUETTI AC180 at 10 cm H2O with the humidifier off.

Does the humidifier work on battery power?

Yes. ResMed's DC converter runs the humidifier and heated tube, but they use most of the power. Turning the humidifier off more than doubles the nights.

Sources

  1. ResMed, Power consumption of Air10 devices (1018673/1), read September 30, 2026
  2. ResMed, Battery guide (198103/7, 2018-08), Air10 series table, read October 17, 2026
  3. ResMed, Air10/S9 DC/DC converter 90W user guide (3781073/1, 2022-12); price: CPAP.com, October 17, 2026
  4. Station power use: the tests listed on each station’s page; BLUETTI AC180: 13.8 to 14 W, measured by Jasonoid (YouTube) (June 14, 2023) and Outdoor Life (2024-02)
  5. Amazon listings and prices checked October 17, 2026.

We did not test these machines or stations ourselves. Every figure names whose test or document it comes from. Hours use our one runtime rule.

More on this